We stand behind our work and are committed to providing lasting quality. Our warranty covers workmanship, structural elements, and manufacturer-backed materials. **2-Year Limited Warranty – Workmanship** Coverage for framing, structural integrity, siding, exterior finishes, roofing, shingles, doors, and windows (installation only) for two years from project completion. **2-Year Warranty – Electrical Work** All electrical components installed by our certified electricians are covered for two years, including outlets, switches, lighting, circuit wiring, and connections. **5-Year Warranty – Structural Framing** We guarantee the framing and structural elements of the garage against failure due to poor workmanship or defective materials for five years. **James Hardie® Siding (If Installed)** 30-Year Limited Warranty on the siding material and 15-Year Warranty on paint and finish (ColorPlus® Technology). Warranty details provided directly by James Hardie—subject to registration and terms. **Manufacturer Warranty – Vinyl Siding** Limited Lifetime Manufacturer Warranty provided by the siding brand used on your project. Typical coverage includes protection against cracking, warping, peeling, blistering, and manufacturing defects. The warranty is usually transferable once to a subsequent homeowner within the first 10 years (terms vary by brand). **Asphalt Shingle Roofing** Most roofing systems we install are covered by a Limited Lifetime Warranty from the manufacturer, including coverage against manufacturing defects and up to a 10-year non-prorated period depending on the product line. Extended warranties may be available if registered—please ask for your specific product details. **What’s Not Covered** Damage due to improper maintenance, neglect, or modifications by others, natural wear and tear or cosmetic changes (e.g., fading paint, minor cracks), damage caused by weather events, flooding, soil movement, or other acts of nature, and any third-party additions or installations not completed by our team. **How to Submit a Claim** If you notice an issue covered under warranty, please contact us at [info@buildgarageyyc.ca](mailto:info@buildgarageyyc.ca) with a description and photos (if applicable). We'll assess the concern and schedule a repair if needed. Your satisfaction and the long-term durability of your garage are important to us. Thank you for trusting us with your project!

Most Calgary garages are built up to 5-inch thick concrete slab foundation with a 2% slope to allow for proper drainage. Standard curb walls provide structural support, but higher foundation walls may be required on sloped land. Proper site preparation, grading, and drainage solutions are essential to prevent water pooling and foundation issues.

The timeline depends on factors like size, complexity, weather, and permit approvals. On average, a standard detached garage takes 5 to 7 weeks from foundation to final inspection.

Yes, the City of Calgary requires a building permit for most garages. Depending on the size and location, you may also need a development permit. A reputable garage builder should handle this process for you.

Proper Downspout Placement for Your Garage Downspout location depends on your roof slope and drainage plan—it’s key to preventing water damage, pooling, and erosion. Placement Basics: Install at the lowest points of gutters. Extend at least 6 feet from the foundation. Ensure ground slopes away from the garage. Roof Types & Placement: Gable Roof: Downspouts at both ends—avoid high-traffic spots. Hip Roof: Place at each corner to manage runoff. Shed Roof: Install on the low side; use splash blocks or rain leaders. Tips: ✔ Use extensions/splash pads. ✔ Avoid driveways and walkways. ✔ Maintain proper grading around the garage

Garage costs vary based on size, materials, and features. A basic single-car garage may start around $18,000–$20,000, while a double-car garage typically ranges from $25,000–$40,000+, depending on customizations.

​ Curing is a critical step in concrete construction, ensuring strength, durability, and resistance to cracking. The process typically takes 28 days for full curing, though the concrete reaches about 70% of its strength within the first 7 days.​ ​ 1. Initial Set (0–24 Hours) The concrete begins to harden as water reacts with cement in a process called hydration. It’s crucial to keep the surface moist and avoid disturbances to prevent cracks. Key risk: If exposed to extreme heat, cold, or wind, moisture can evaporate too quickly, weakening the concrete. ​​ 2. Strength Development (1–7 Days) The concrete gains significant strength, reaching about 50-70% of its final strength by day 7. Moisture retention is essential—builders use curing blankets, water spraying, or plastic sheets to prevent premature drying. Walking on the surface is possible after 24–48 hours, but heavy loads should be avoided until further curing. ​ 3. Continued Hydration & Hardening (7–28 Days) The concrete continues to gain strength and density, reaching its full potential at 28 days. It should be kept moist and protected from extreme weather during this period. The surface can generally support vehicles and heavy loads after 7-10 days, but full structural strength is achieved after four weeks. ​​ Best Practices for Proper Concrete Curing ✔ Keep Moisture In – Use water spraying, curing compounds, or plastic sheeting to prevent drying too quickly. ✔ Avoid Freezing or Overheating – Extreme temperatures can weaken concrete; heated blankets or shade can help. ✔ Minimize Early Stress – Avoid driving or placing heavy objects on the slab before it reaches full strength. Proper curing ensures your garage foundation is strong, crack-resistant, and long-lasting.

Small gaps in OSB (Oriented Strand Board) are intentional and essential for proper installation. Key Reasons: Expansion & Contraction Wood expands with heat and moisture. A 1/8" gap prevents buckling and warping. Code & Manufacturer Requirements Gaps are required by OSB manufacturers and often by building codes, including those in Alberta. Structural Stability Proper spacing prevents pressure buildup, cracking, or lifting, ensuring a stable surface. Should You Worry? Even gaps = good. Gaps over 1/4" or uneven = check with your builder or inspector.

It’s completely normal for new concrete to change color as it cures. This is due to moisture, hydration, and weather conditions. Main Reasons: Moisture Evaporation – Concrete starts dark and lightens as water evaporates. Hydration – The curing process can cause temporary patchiness. Weather – Hot/dry conditions lighten concrete faster; cool/damp conditions keep it darker longer. Uneven Drying – Shaded or thicker areas may retain moisture and appear darker. When Will It Look Uniform? Color usually evens out in 7–14 days, with final results after 28 days. 💡 Tip: Keep concrete moist early on and avoid walking on it too soon for best results.

Proper care for your concrete garage pad helps maintain its strength, appearance, and longevity. Here are some key tips: **1. Keep It Clean** - Regular Sweeping: Remove dirt, leaves, and debris regularly to prevent stains and surface damage. - Wash Occasionally: Use a garden hose or pressure washer on a low setting to wash away grime, oil, or salt residue. - Avoid Harsh Chemicals: Use mild detergents or concrete-specific cleaners rather than harsh acids or bleach. **2. Seal the Concrete** - Apply a Sealer: Seal your concrete pad every year to protect against water penetration, stains, and freeze-thaw damage. - Choose the Right Sealer: Use a high-quality penetrating or acrylic sealer made for concrete. **3. Prevent and Repair Cracks** - Inspect Regularly: Check for small cracks and repair them early with concrete patch or epoxy fillers. - Avoid Heavy Loads: Don’t park extremely heavy vehicles or equipment that exceed the pad’s load capacity. - Control Water Drainage: Ensure proper drainage around the pad to avoid water pooling and soil erosion under the slab. **4. Manage Winter Conditions** - Use Concrete-Safe Deicers: Avoid deicing salts that can damage concrete; use calcium magnesium acetate or sand instead. - Remove Snow Promptly: Use plastic shovels or snow blowers rather than metal shovels to avoid surface damage. **5. Protect Against Stains** - Clean Oil or Chemical Spills Immediately: Use absorbent materials and cleaners designed for concrete to avoid permanent stains. - Consider Mats or Pads: Place mats under vehicles to catch leaks or spills. **6. Avoid Harsh Impacts** - Prevent dropping heavy tools or materials on the pad, which could chip or crack the surface.

Caring for your siding properly keeps your home looking great and protects it from weather damage. Here’s a straightforward guide to siding care: 1. Regular Cleaning Wash Annually: Clean your siding at least once a year with a garden hose and a soft brush or cloth. Use a mild detergent mixed with water for tougher dirt. Pressure Washing: You can use a pressure washer on a low setting, but keep the nozzle at least a few feet away to avoid damaging the siding. Avoid Harsh Chemicals: Stay away from bleach or abrasive cleaners unless the manufacturer specifically recommends them. 2. Inspect for Damage Look for Cracks, Warping, or Loose Panels: Check siding for damage caused by weather, pests, or impacts. Repair Quickly: Fix small cracks or holes with caulk or siding repair kits to prevent water infiltration. 3. Protect from Moisture Maintain Gutters and Downspouts: Make sure water is directed away from the siding to avoid water damage and mold. Trim Vegetation: Keep bushes and trees trimmed away from siding to reduce moisture buildup and prevent scratches or insect access. 4. Repaint or Refinish (If Applicable) Wood Siding: Needs repainting or refinishing every 5-10 years to protect against rot and sun damage. Fiber Cement or Vinyl Siding: Typically doesn’t require painting, but if you choose to repaint, use appropriate exterior paint. 5. Avoid Physical Damage Be careful with lawn equipment, hoses, and other tools around your siding to prevent dents or scratches. 6. Address Mold and Mildew Clean Promptly: Use a mixture of water and vinegar or a siding-safe cleaner to remove mold or mildew spots as soon as you see them.